UV-Absorber und Antioxidantien, die Beschichtungsfilme auf Außen- und bewitterten Flächen vor sonnenlichtbedingtem Verblassen, Auskreiden und Versprödung schützen.
UV-Stabilisatoren und Antioxidantien sind Additive, die einen Beschichtungsfilm vor zwei unterschiedlichen Abbauwegen schützen: dem durch Sonnenlicht getriebenen photochemischen Abbau und dem thermooxidativen Abbau während Härtung und Gebrauch. Sie verhindern, dass ein Außenanstrich verblasst, auskreidet und reißt. Die Familie umfasst drei Arbeitsklassen — UV-Absorber, sterisch gehinderte Amin-Lichtschutzmittel (HALS) und Antioxidantien —, und ein dauerhaftes Außensystem kombiniert in der Regel einen UV-Absorber mit einem HALS.
UV absorbers convert UV energy into harmless heat before it can break polymer bonds. Octocrylene and the benzotriazole-class absorbers are common choices for clear and pigmented coatings. The honest limitation: absorbers are consumed over time and work poorly in very thin films, where too little material sits in the light path. That is why formulators combine them with a HALS, which scavenges the free radicals that drive degradation and keeps working catalytically rather than being used up. Specify an absorber for surface protection and a HALS for long-term film integrity.
Antioxidants such as BHT address the other pathway. They interrupt oxidation during high-temperature cure and over the coating's service life, protecting the resin from yellowing and embrittlement. Antioxidants are not a substitute for UV protection; they address oxidation, not photolysis. For a fully weatherable system, treat UV absorber, HALS, and antioxidant as complementary rather than interchangeable.
Wir verwenden Cookies und ähnliche Technologien für Analysen und zur Verbesserung unserer Website sowie — mit Ihrer Einwilligung — für Marketing und die Identifizierung von B2B-Besuchern. Wählen Sie aus, was Sie zulassen möchten. Siehe unsere Datenschutzerklärung.