Abordagem de solução
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
System Assessment
Characterize operating conditions — fluid composition, temperature, pressure, flow, and H2S/CO2/water cut — and benchmark current treatment performance.
2
Chemistry Selection
Match scale and corrosion inhibitors, biocides, or demulsifiers to the operating envelope, factoring compatibility, regulatory constraints, and downstream impacts.
3
Field Trial & Dosing
Determine treat rates through bottle and field trials, and configure continuous or batch delivery and packaging (drums, totes, ISO tanks) to logistics.
4
Monitoring & Adjustment
Track corrosion coupon/ER rates, residual inhibitor, and separator and water-quality performance, adjusting chemistry and dose as wells change.
Recommended Chemistries (7)
Polyacrylamide Flocculant (anionic PAM)
CAS 9003-05-8
Polímeros e Resinas
Primary flocculant backbone
High-molecular-weight anionic polyacrylamide reduces turbulent drag in slickwater so frac fluid can be pumped at lower surface pressure and horsepower
Visualização rápida
Detalhes completos
Guar gum
CAS 9000-30-0
Aditivos Especiais
Modificação de viscosidade
Galactomannan gelling agent that builds viscosity to suspend and transport proppant into the fracture
Visualização rápida
Detalhes completos
Hydroxypropyl guar
CAS 39421-75-5
Aditivos Especiais
Limpeza / Desengraxe
Derivatized, lower-residue guar that crosslinks for higher-temperature gel stability and cleaner proppant-pack conductivity
Visualização rápida
Detalhes completos
Sodium Persulfate
CAS 7775-27-1
Aditivos Especiais
Reticulação / Cura
1505 (SODIUM PERSULFATE) · Class Oxidative breaker that cleaves the polymer backbone on a timed schedule to break the gel and restore fracture conductivity after placement
Physical Description: Sodium persulfate appears as a white crystallin… Solubility: Solubility in water, g/100ml at 20 °C: 55.6 Densidade:1.1 g/cm3
Visualização rápida
Detalhes completos
Boric Acid
CAS 10043-35-3
Ácidos e Sais
Ação biocida
Borate crosslinker that links guar chains into a high-viscosity, shear-reversible gel above about pH 9
Physical Description: Colourless, odourless, transparent crystals or … Appearance: Colorless, transparent crystals or white granul… Odor: Odorless
Visualização rápida
Detalhes completos
DBNPA (2,2-Dibromo-3-Nitrilopropionamide)
CAS 10222-01-2
Aditivos Especiais
Fast-acting biocide
2923 (2,2-DIBROMO-3-NITRILOPROPIONAMIDE) · Class Fast-acting biocide that controls bacteria including sulfate-reducers in frac water, preventing souring and bio-degradation of the polymer
Ponto de fusão:123 to 126 °C Ponto de ebulição:Decomposes at 190 °C Solubility: In water, 1.5 g/100 mL (15,000 mg/L)
Visualização rápida
Detalhes completos
Polyacrylamidomethylpropane sulfonic acid (poly-AMPS)
CAS 27119-07-9
AMPS-based polymers are a genuine, standard slickwater friction-reducer technology. The sulfonate group resists charge-shielding in high-TDS brine, directly solving the failure mode of conventional anionic PAM (chain coiling/loss of drag reduction) in high-salinity produced-water fracs, and adds thermal tolerance. CAS 27119-07-9 correctly identifies polyAMPS. Use-case specific to this page.
Visualização rápida
Detalhes completos
Famílias de produtos relacionadas
● Sourcing-only
Biocidas
Glutaraldeído, THPS, amônio quaternário e biocidas oxidantes para manuseio de água
Controle MicrobianoBiofilme
13 chemistries
Ver família
● Disponível
Floculantes e Coagulantes
Polyacrylamides, polyDADMAC, and inorganic coagulants for thickening and clarification
FlocculationCoagulation
5 chemistries
Ver família