Abordagem de solução
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
System Assessment
Characterize operating conditions — fluid composition, temperature, pressure, flow, and H2S/CO2/water cut — and benchmark current treatment performance.
2
Chemistry Selection
Match scale and corrosion inhibitors, biocides, or demulsifiers to the operating envelope, factoring compatibility, regulatory constraints, and downstream impacts.
3
Field Trial & Dosing
Determine treat rates through bottle and field trials, and configure continuous or batch delivery and packaging (drums, totes, ISO tanks) to logistics.
4
Monitoring & Adjustment
Track corrosion coupon/ER rates, residual inhibitor, and separator and water-quality performance, adjusting chemistry and dose as wells change.
Recommended Chemistries (10)
Alkyl Pyridine
CAS 68391-11-7
Aditivos Especiais
Inibição de corrosão
Nitrogen-base film former widely used as an acidizing/sour-system corrosion inhibitor intermediate
Visualização rápida
Detalhes completos
Cyclohexylamine
CAS 108-91-8
Aminas e Amidas
Neutralizing amine
2357 (CYCLOHEXYLAMINE) · Class Volatile neutralizing amine that raises condensate pH to suppress CO2/carbonic-acid attack
Ponto de fusão:-18 °C Ponto de ebulição:134 °C at 760 mmHg Densidade:0.8647 at 25 °C
Visualização rápida
Detalhes completos
Molibdato de Sódio
CAS 7631-95-0
Aditivos Especiais
Inibição de corrosão
Anodic inhibitor that reinforces the passive oxide on steel; best suited to the water-handling side of production rather than the CO2/H2S front line
Physical Description: White solid; Colorless crystalline solid Ponto de fusão:687 °C Solubility: Solubility in water, g/100ml at 100 °C: 84
Visualização rápida
Detalhes completos
Dodecylamine
CAS 124-22-1
Aminas e Amidas
Reticulação / Cura
2735 (DODECANAMINE) · Class Long-chain primary (fatty) amine that adsorbs through its amino head group and lays down a hydrophobic film on carbon-steel tubing/flowlines, the correct substrate for CO2/organic-acid production corrosion
Ponto de fusão:28.3 °C Ponto de ebulição:259 °C Densidade:0.8015 g/cu cm @ 20 °C/4 °C
Visualização rápida
Detalhes completos
Oilfield Imidazoline Corrosion Inhibitor (Amphoteric)
CAS 68630-96-6
Ésteres
Emoliência
Amphoteric imidazoline (carboxylate/hydroxyethyl-substituted) of the classic oilfield CO2 corrosion-inhibitor family; the imidazoline ring chemisorbs on steel and the fatty tail builds a persistent protective film
Visualização rápida
Detalhes completos
Propargyl alcohol
CAS 107-19-7
Solventes
Poder de solvência
1986 (PROPARGYL ALCOHOL) · Class Propargyl alcohol is the textbook acetylenic corrosion inhibitor for steel in acidizing/sour service: it polymerizes on the steel surface to form a protective film that suppresses acid attack during stimulation and pickling
Ponto de fusão:-48 °C Ponto de ebulição:114 °C at 760 mmHg Densidade:0.9485 at 20 °C
Visualização rápida
Detalhes completos
Diglycolamine (DGA)
CAS 929-06-6
Glicóis e Polióis
Formação de filme
3055 (2-(2-AMINOETHOXY)ETHANOL) · Class Film-forming/gas-treating amine: the amino head group adsorbs on carbon steel and lays down a thin hydrophobic film that blocks CO2/H2S charge-transfer at the tubing wall
Ponto de fusão:FP: -12.5 °C Ponto de ebulição:221 °C Densidade:1.0572 @ 20 °C/20 °C
Visualização rápida
Detalhes completos
Diethylenetriamine
CAS 111-40-0
Aminas e Amidas
Reticulação / Cura
2079 (DIETHYLENETRIAMINE) · Class Classic imidazoline precursor — condensed with a fatty acid it yields the oilfield imidazoline corrosion inhibitor; stocked as the raw amine to formulate that steel-filming chemistry
Ponto de fusão:-39 °C Ponto de ebulição:207 °C at 760 mmHg Densidade:0.954 at 20 °C
Visualização rápida
Detalhes completos
Triethylenetetramine
CAS 112-24-3
Aminas e Amidas
Reticulação / Cura
2259 (TRIETHYLENETETRAMINE) · Class Higher-homolog ethyleneamine used to build longer-tail amido-amine/imidazoline inhibitors that chemisorb on carbon steel
Ponto de fusão:12 °C Ponto de ebulição:266–267 °C at 760 mmHg Densidade:0.982 at 20 °C
Visualização rápida
Detalhes completos
Ethyleneamines E-100
CAS 107-15-3
Aminas e Amidas
Reticulação / Cura
1604 (ETHYLENEDIAMINE) · Class Commercial ethyleneamine blend reacted with fatty acids to make imidazoline film-forming inhibitors for carbon-steel CO2/H2S service
Ponto de fusão:8 °C Ponto de ebulição:116 °C at 760 mmHg Densidade:0.898 at 25 °C
Visualização rápida
Detalhes completos