살포액의 표면장력을 낮추고 탱크믹스 및 농약 제조 공정의 기포를 제어하는 유기실리콘계 슈퍼 스프레더와 실리콘 기포방지제 — 트리실록산 젖음제, PDMS 기포방지 에멀션, 휘발성 실리콘 담체.
작물보호제 보조제는 살포액이 잎 표면에서 거동하는 방식을 바꾸는 제형 및 탱크 혼합 첨가제이며, 농약 자체의 생물학적 활성을 바꾸는 것은 아닙니다. 여기 제시된 두 계열은 물리적 역할을 수행합니다: 유기실리콘 슈퍼 스프레더 (폴리에테르 변성 트리실록산)은 살포 액적의 표면장력을 낮추며, 실리콘 소포제 혼합 및 살포 장비에서 거품을 제거하고 억제합니다. 두 제품 모두 유틸리티 보조제이며 — 살포액의 물성을 조정할 뿐 자체적인 농약 효능 표시는 없습니다.
A polyether-modified trisiloxane can drop aqueous surface tension to roughly 20-22 mN/m, well below what a conventional nonionic surfactant reaches, which lets the droplet wet waxy, hydrophobic cuticles and spread into a thin film. The trade-off is real: that same low surface tension can cause runoff or over-spreading on already-wettable surfaces, and trisiloxanes hydrolyze faster at high or low tank pH. Buffer the tank near neutral pH and mix close to spray time rather than holding a diluted batch overnight.
Silicone antifoam emulsions based on polydimethylsiloxane serve a different need: persistent foam control that survives a full tank fill, where an alcohol knockdown fades within minutes. They are dosed at a few hundred ppm and are the workhorse for high-shear mixing in agrochemical manufacturing. Octamethyltrisiloxane, a low-viscosity volatile silicone, rounds out the set as a spreading and carrier fluid. Specify the emulsion grade for water-based tanks and confirm compatibility with the actives in your formulation.
당사는 분석 및 사이트 개선을 위해, 그리고 — 귀하의 동의를 받은 경우 — 마케팅 및 B2B 방문자 식별을 위해 쿠키와 유사 기술을 사용합니다. 허용할 항목을 선택해 주세요. 자세한 내용은 개인정보처리방침.