홈 & 산업용 케어 / 솔루션 제품군

컨디셔닝제 및 유연제

린스 공정 섬유유연제 및 세탁 컨디셔닝용 양이온·실리콘 유효성분 — 원단 촉감 개선과 정전기 감소를 위한 디알킬 4급 암모늄 유연 유효성분 및 dimethicone 에멀션.

개요

컨디셔닝제 및 유연제는 세탁 린스 과정에서 섬유에 침착하여 경직감, 표면 마찰, 정전기 부착을 낮추는 양이온성 및 실리콘 유효성분입니다. 이들은 섬유 표면에 얇은 윤활층을 형성해 촉감을 개선하고 워시앤웨어 의류의 마찰을 줄입니다. 대부분의 헹굼 단계 유연제는 양이온 유효성분을 기반으로 하며, 더 실키한 촉감이 필요할 때 실리콘 에멀션을 추가합니다.

Dihydrogenated tallow dimethylammonium chloride (DHTDMAC) is the classic dialkyl quaternary softening active and still ships in volume for value rinse-cycle softeners. The honest trade-off is environmental: DHTDMAC has poor ready biodegradability and was voluntarily phased out across the EU in the early 1990s in favor of ester quats, which hydrolyze more readily. Specify DHTDMAC where cost and softening performance lead the brief; move to an ester quat where biodegradability or regional regulation drives the decision. Confirm regulatory status for your application and jurisdiction.

Dimethicone emulsion is the silicone option, dosed at low addition levels to add slip and a premium hand feel that quats alone do not deliver. It is a complement to the cationic active, not a replacement, because silicone provides lubricity but little of the substantivity that rinse-cycle deposition needs. Add it as a performance booster once the cationic base is set.

권장 화학제품
원료 19종
Dicoco Dimethyl Ammonium Chloride (Quaternium-34)
CAS 61789-77-3
린스 공정용 양이온 유연 유효성분 빠른 보기
Dihydrogenated Tallow Dimethyl Ammonium Chloride (Quaternium-18)
CAS 61789-80-8
컨디셔닝 빠른 보기
Dimethicone (PDMS, Silicone oil, Dimethyl silicone)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
폴리다이메틸실록세인
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
Methyl Bis(hydrogenated Tallow Amidoethyl)-2-hydroxyethyl Ammonium Methyl Sulfate
CAS 81646-13-1
컨디셔닝 빠른 보기
Methyl Nortallow Tallowamidoethyl Imidazolinium Methosulfate
CAS 68610-77-5
컨디셔닝 빠른 보기
Methyl-1-tallow Amidoethyl-2-tallow Imidazolinium Methyl Sulfate
CAS 68122-86-1
컨디셔닝 빠른 보기
실리콘 오일 1,000 cSt (Dimethicone, PDMS)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
실리콘 오일 10 cSt (Dimethicone, PDMS)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
폴리다이메틸실록세인 (10,000 cSt)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
실리콘 오일 100 cSt (Dimethicone, PDMS)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
실리콘 오일 100,000 cSt (Dimethicone, PDMS)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
실리콘 오일 12,500 cSt (Dimethicone, PDMS)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
실리콘 오일 350 cSt (Dimethicone, PDMS)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
폴리다이메틸실록세인 (5 cSt)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
실리콘 오일 50 cSt (Dimethicone, PDMS)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
폴리다이메틸실록세인 (500,000 cSt)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
폴리다이메틸실록세인 (60,000 cSt)
CAS 9006-65-9
실리콘 유연 / 컨디셔닝 유효성분 빠른 보기
Stearyl Methicone
CAS 68554-54-1
컨디셔닝 빠른 보기
사용처
  • 린스 사이클용 액상 섬유 유연제
  • 세탁 유연 처리 및 대전 방지 가공
  • 건조기 투입형 유연 제품
  • 세제 겸용 유연제(2-in-1) 액상 제품
  • 프리미엄 촉감을 위한 실리콘 강화 유연 처리
자주 묻는 질문
RawSource는 세탁용으로 어떤 컨디셔닝 및 유연 유효성분을 공급합니까?
RawSource는 린스 사이클 유연제용 디알킬 4급암모늄 유연 유효성분 dihydrogenated tallow dimethylammonium chloride(DHTDMAC)와, 실리콘계 촉감 부스터인 dimethicone 에멀션을 공급합니다. 생분해성을 고려한 재배합을 위해 에스터쿼트와 컨디셔닝 폴리머도 요청 시 조달 가능합니다.
RawSource는 섬유유연제 유효성분을 벌크로 공급합니까?
네. 양이온 유연 유효성분과 실리콘 에멀션은 세탁 및 섬유 케어 배합 업체와 수탁 생산 업체를 위해 드럼, 토트 및 IBC로 공급되며 CAS 번호와 SDS, TDS, COA 문서가 함께 제공됩니다.
디알킬 4급 암모늄 유연제와 에스터 4급 암모늄 유연제의 차이는 무엇입니까?
두 제품 모두 섬유에 침착하여 유연성을 부여하고 정전기를 줄이는 양이온 유효성분입니다. 디알킬 4급 암모늄(DHTDMAC)은 단가가 낮은 고전적 소재이지만 즉시 생분해성이 낮아, 가수분해가 더 쉽게 일어나도록 설계된 에스터 쿼트가 여러 시장에서 이를 대체했습니다. 해당 용도와 관할 지역의 규제 현황을 확인하십시오.
실리콘 에멀션이 양이온성 유연제를 대체합니까?
아니요. Dimethicone 에멀션은 슬립성과 고급스러운 촉감을 부여하지만 린스 사이클 침착에 필요한 기질 친화성이 부족하므로, 단독 유효성분이 아니라 양이온성 유연 베이스를 보완하는 용도로 투입됩니다.
면책 조항. Information on this page is provided for general reference and compiled from authoritative public sources (e.g. PubChem/ECHA). Values are typical and are not a guaranteed specification; the Certificate of Analysis (CoA) for the lot you purchase governs. Products are sold for industrial and professional use only. Nothing here is a medical, health, or efficacy claim. Always consult the current Safety Data Sheet (SDS) before handling, and confirm regulatory status, classification, and suitability for your application and jurisdiction.
견적 요청 제품 페이지

전체 제품 카탈로그 →