Lösungsansatz
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
System Assessment
Characterize operating conditions — fluid composition, temperature, pressure, flow, and H2S/CO2/water cut — and benchmark current treatment performance.
2
Chemistry Selection
Match scale and corrosion inhibitors, biocides, or demulsifiers to the operating envelope, factoring compatibility, regulatory constraints, and downstream impacts.
3
Field Trial & Dosing
Determine treat rates through bottle and field trials, and configure continuous or batch delivery and packaging (drums, totes, ISO tanks) to logistics.
4
Monitoring & Adjustment
Track corrosion coupon/ER rates, residual inhibitor, and separator and water-quality performance, adjusting chemistry and dose as wells change.
Recommended Chemistries (5)
Polyacrylamide Flocculant
CAS 9003-05-8
Polymere & Harze
Primary flocculant backbone
Pre-flocculates fines so the filter cake forms with higher permeability and faster throughput
Schnellansicht
Alle Details
Sodium Laureth Sulfate
CAS 3088-31-1
Tenside
Reinigung / Entfettung
Dewatering surfactant that lowers capillary surface tension in the cake to reduce residual moisture
Schnellansicht
Alle Details
Sodium Xylene Sulfonate 40%
CAS 1300-72-7
Tenside
Reinigung / Entfettung
Hydrotrope/wetting aid that improves filtrate drainage in dewatering blends
Schmelzpunkt:27 °C Siedepunkt:157 °C at 760 mmHg Dichte:1.23
Schnellansicht
Alle Details
Polyethylene-Polypropylene Glycol
CAS 9003-11-6
Glykole & Polyole
Separation aid
EO/PO block copolymer is a purpose-built low-foam nonionic wetting/dewatering aid for vacuum and pressure filtration; low-foam behavior is specifically required for this application and directly improves filtrate drainage and lowers cake moisture. Genuine fit.
Schnellansicht
Alle Details
Laureth-2
CAS 3055-93-4
Low-mole (2-EO) lauryl alcohol ethoxylate: low-HLB, low-foaming, same lauryl-ethoxylate backbone as the already-listed sodium laureth sulfate. Low-mole ethoxylates genuinely act as cake-dewatering surfactants, reducing residual moisture by promoting capillary drainage. Genuine same-family fit.
Schnellansicht
Alle Details
Verwandte Produktfamilien
● Sourcing-only
Demulgatoren / Entöler
Tensidmischungen und EO/PO-Copolymere zur Rohöl-/Wasser-Trennung
EmulsionsspaltungPhasentrennung
5 chemistries
Familie anzeigen
● Verfügbar
Flockungsmittel & Koagulationsmittel
Polyacrylamides, polyDADMAC, and inorganic coagulants for thickening and clarification
FlocculationCoagulation
5 chemistries
Familie anzeigen