Lösungsansatz
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Formulation Workflow
1
System & Substrate Assessment
Define the binder system (waterborne, solventborne, UV, powder), substrate, cure, and the VOC, durability, and appearance targets.
2
Additive & Resin Selection
Match resins, pigments and fillers, dispersants, rheology modifiers, defoamers, or biocides to the formulation and compatibility window.
3
Lab Let-Down & Optimization
Dial in loading and addition order through lab let-downs, checking dispersion, rheology, film properties, and storage stability.
4
Application & Performance Testing
Validate on the real application method and substrate, tracking gloss, adhesion, sag, cure, and weathering before scale-up.
Recommended Chemistries (5)
UV-328 Benzotriazole UV Absorber (Tinuvin 328 Type)
CAS 25973-55-1
Spezialadditive
Organic UV absorber for clear coatings
Hydroxyphenyl-benzotriazole UVA absorbs 300-380 nm light and dissipates it as heat, protecting resin and substrate from photolysis
Physical Description: Dry powder, pellets or crystals, or solid Appearance: White to yellow powder or crystals Solubility: In water, log -1.37
Schnellansicht
Alle Details
Sodium Benzotriazolyl Butylphenol Sulfonate
CAS 92484-48-5
Tenside
UV-Schutz
Water-soluble benzotriazole UV absorber for waterborne systems, screening UV before it reaches the binder
Schnellansicht
Alle Details
BHT (Butylated Hydroxytoluene), Food Grade
CAS 128-37-0
Spezialadditive
Antioxidans zur Harzstabilisierung
Hindered-phenol antioxidant donates H to chain-carrying peroxy radicals, interrupting thermal/photo-oxidative degradation of the resin
Schmelzpunkt:69–71 °C Siedepunkt:265 °C at 760 mmHg Dichte:1.048 at 20 °C
Schnellansicht
Alle Details
Titanium Dioxide
CAS 13463-67-7
Mineralische Füllstoffe & Pigmente
Primary white pigment for opacity
Rutile (surface-treated) titanium dioxide reflects and absorbs UV, physically shielding the binder beneath; note uncoated/anatase grades are photocatalytic and promote chalking, so only coated rutile grades protect
Schmelzpunkt:1860 °C (decomposes) Siedepunkt:2500–3000 °C at 760 mmHg Dichte:3.9 to 4.2
Schnellansicht
Alle Details
Zinc Oxide
CAS 1314-13-2
Mineralische Füllstoffe & Pigmente
Active pigment — mildew resistance and UV blocking
3077 (ZINC OXIDE, CRUDE) · Class Genuine inorganic UV absorber/screen used in exterior and clear coatings to block UV-A/UV-B, protecting the binder from photo-oxidation and curbing chalking. Micronized/nano ZnO is used specifically in transparent wood coatings and clear topcoats where pigmentary TiO2's opacity is undesirable, so it is a true complement to the listed TiO2 for this exact UV-weathering/degradation use-case, not just
Schmelzpunkt:1975 °C Dichte:5.61 Solubility: 0.0004 % at 18 °C
Schnellansicht
Alle Details
Verwandte Produktfamilien
● Verfügbar
Mineralische Füllstoffe & Extender
Calcium carbonate, titanium dioxide, and specialty minerals for opacity, filling, and cost optimization
FillingOpacityCost Reduction
12 chemistries
Familie anzeigen
● Sourcing-only
UV-Stabilisatoren & Antioxidantien
UV absorbers, HALS, and antioxidants for exterior coating durability and color retention
UV-SchutzKonservierung
1 chemistries
Familie anzeigen