Aceites base minerales, nafténicos y de polialfaolefina (PAO) como insumos de materia prima para fluidos de metalmecánica y mezclado de lubricantes industriales.
Los aceites base son la mayor fracción de materia prima de casi todo lubricante y fluido de corte soluble en agua — habitualmente del 70 al 95 por ciento de la mezcla terminada — y son el vehículo del paquete de aditivos que aporta la protección. En la manufactura industrial se dividen en tres tipos de trabajo: aceites minerales parafínicos, aceites nafténicos y polialfaolefinas sintéticas (PAO). El aceite base define la viscosidad, el poder solvente para los aditivos y el comportamiento térmico y de oxidación del fluido terminado.
Paraffinic mineral oils, such as a 90-viscosity stock, are the default carrier for general lubricants and soluble cutting fluids because they balance cost, viscosity, and additive response. Naphthenic oils carry a lower pour point and dissolve additives and metal soaps more readily, which makes them useful in soluble metalworking concentrates and in fluids that must stay clear at low temperature. Choose naphthenic where solvency and low-temperature behavior matter more than oxidation life.
Polyalphaolefin is the synthetic option. It gives a higher viscosity index, better oxidation stability, and a wider service-temperature range than mineral stock, which extends drain intervals in demanding lubricants. The trade-off is cost: PAO runs several times the price of a paraffinic base oil, so it is specified where service life or temperature span justifies the spend, not as a drop-in for commodity fluids. Blend it with esters when additive solubility needs a lift.
Utilizamos cookies y tecnologías similares con fines analíticos y para mejorar nuestro sitio y — con su consentimiento — para marketing e identificación de visitantes B2B. Elija qué desea permitir. Consulte nuestra Política de Privacidad.