Enfoque de solución
RawSource supplies the base chemicals that go into these programs. We can help with product selection, grade matching, and sourcing from multiple origins for supply security.
Typical Treatment Workflow
1
System Assessment
Characterize operating conditions — fluid composition, temperature, pressure, flow, and H2S/CO2/water cut — and benchmark current treatment performance.
2
Chemistry Selection
Match scale and corrosion inhibitors, biocides, or demulsifiers to the operating envelope, factoring compatibility, regulatory constraints, and downstream impacts.
3
Field Trial & Dosing
Determine treat rates through bottle and field trials, and configure continuous or batch delivery and packaging (drums, totes, ISO tanks) to logistics.
4
Monitoring & Adjustment
Track corrosion coupon/ER rates, residual inhibitor, and separator and water-quality performance, adjusting chemistry and dose as wells change.
Recommended Chemistries (5)
Glutaraldehído
CAS 111-30-8
Aditivos Especiales
Primary oilfield biocide
2810 (GLUTARALDEHYDE SOLUTION) · Class Dialdehyde that crosslinks cell-wall and membrane proteins, the workhorse broad-spectrum oilfield biocide
Punto de fusión:< -7 °C Punto de ebullición:187–189 °C at 760 mmHg (decomposes) Densidad:1.062 to 1.124 at 20 °C
Vista rápida
Detalles completos
Tetrakis(Hydroxymethyl)Phosphonium Sulfate(THPS)
CAS 55566-30-8
Aditivos Especiales
Biocide, good in sulfide systems
2922 (TETRAKIS(HYDROXYMETHYL)PHOSPHONIUM SULFATE SOLUTION) · Class Fast-acting biocide especially strong against SRB, and dissolves existing FeS biofilm/scale
Punto de fusión:-35 °C Punto de ebullición:111 °C at 760 mmHg Densidad:1.381 at 22 °C
Vista rápida
Detalles completos
DBNPA (2,2-Dibromo-3-Nitrilopropionamide)
CAS 10222-01-2
Aditivos Especiales
Fast-acting biocide
2923 (2,2-DIBROMO-3-NITRILOPROPIONAMIDE) · Class Fast-kill, quickly-degrading biocide for slug/online dosing of water systems
Punto de fusión:123 to 126 °C Punto de ebullición:Decomposes at 190 °C Solubility: In water, 1.5 g/100 mL (15,000 mg/L)
Vista rápida
Detalles completos
Benzalkonium Chloride (BKC, ADBAC)
CAS 8001-54-5
Tensioactivos
Acondicionamiento
2928 · Class Quaternary ammonium that disrupts microbial membranes and penetrates biofilm
Punto de fusión:241.02 °C Densidad:0.9429 g/cu cm at 25 °C Solubility: Very soluble in alcohol, acetone; slightly solu…
Vista rápida
Detalles completos
Chlorine Dioxide
CAS 10049-04-4
Aditivos Especiales
Acción biocida
9191 (CHLORINE DIOXIDE) · Class Fast-acting oxidizing biocide that penetrates and disperses established biofilm and controls sulfate-reducing bacteria (SRB); stays effective across a wider pH range than aldehyde biocides and leaves no persistent chlorinated-organic residual.
Punto de fusión:-59 °C Punto de ebullición:11 °C at 760 mmHg Densidad:1.6 (Liquid at 0 °C)
Vista rápida
Detalles completos